Share This Story, Choose Your Platform!
Download the instructions
Print Friendly, PDF & Email
Welcome to our ‘How-To’ video series!

Heat will not turn on

    1. Check the thermostat settings and verify the temperature is set higher than the current room temperature.
    2. Inspect the air filter and replace it if dirty. Dirty filters can block airflow.
    3. Check the circuit breaker and reset if tripped. Verify power is going to the HVAC system.
    4. Examine the condenser unit outside and clear any debris blocking airflow through the coils.
    5. Inspect the blower fan and motor and ensure the fan spins freely. Oil it if needed.
    6. Check the pilot light if it’s a gas furnace. Relight it if needed and test the gas valve.
    7. Look for frost buildup on the coils indicating low refrigerant. Contact an HVAC pro to recharge it.
    8. Make sure vents and ducts are open and unobstructed throughout the house.
    9. Inspect the flame sensor and thermocouple on a gas furnace and clean with steel wool.
    10. Schedule an HVAC professional to examine the system if issues persist after basic troubleshooting.
Explore How-To Videos