Repair: To the extent possible, baseboard heater cover metal can be cleaned and bent back into serviceable condition; attempt to clean and bend the metal back into the desired shape. If corroded and rusty, first clean, then sand, then prime, then paint.
Replace:
Pull off ends caps.
Slide out face plates by pulling down or pressing up and pulling out.
Screw and pull out visible nails and screws.
Slide reciprocating saw blade behind back panel, gently cut through screws to avoid wall damage.
Slide out damper vent.
Press and pop out holding brackets.
Rotate out remaining heater housing.
Replace in reverse order.
Explore How-To Videos
‘How-To’ Videos > Health & Safety > Egress (Fire Escapes)