Welcome to our ‘How-To’ video series!
Bathtub Faucet wont’ shut off
-
- Check for debris or mineral buildup in faucet aerator and clean or replace aerator.
- Remove faucet handle and inspect interior components for wear, damage, or misalignment. Repair or replace parts like cartridge, cam, seals.
- If a compression faucet, check faucet seat and washer condition. Replace if worn out.
- Verify shut off valves under sink are fully closed. Replace leaky valves.
- Disassemble valves and clean any grit or buildup from working parts. Lubricate parts like stems and O-rings.
- Check water supply lines for cracks, improper connectors, or valve problems allowing water to flow.
- Replace inlet hoses going to faucet supply tubes if they have bulges or cracks. Tighten fittings.
- Use pipe wrench to ensure bonnet nut holding faucet body to sink is fully tightened.
- Replace faucet cartridge, valve seats, stems if no specific part identified as causing leak.
- Replace entire faucet assembly if significant internal damage presents safety issue.
